AdBlue™ Gravity Hose Kit
For gravity installations (Max 4m)
AdBlue Gravity Fuel Hose Kit
Image may vary depending on product model
Select image to zoom
From
£100.80
ex. VAT
Fluids
- W
- C
- AB
- AdBlue
- Air
- Antifreeze
- Any
- Chemical
- Diesel
- Grease
- Jet Fuel
- Kerosene
- Oil
- Petrol
- Rapsoil
- Urea
- Water
- Windscreen
About the product
The AdBlue™ Gravity Hose Kit is an all emcompassing solution for the dispensing of AdBlue™ from a bottom outlet, gravity fed installation. Gravity hose kits are a cost effective solution for dispensing AdBlue™ (otherwise known as DEF) from an IBC rather than installing an AdBlue pump system. This is a popular solution for, but not limited to, the agricultural market.
This model of AdBlue™ gravity hose kit is made up of a choice of clear spiral of black EPDM AdBlue delivery hose with hose clips supplied, the Suzzara Blue manual nozzle and a 60 x 6 IBC bottom adaptor. It available in either 3m or 4m kits, to cater for how high off the ground the IBC in question is. You should not order a kit much longer than what is necessary for the height of the system, as any additional hose beyond this point may reduce the flow rate you could be achieving.
Features of the AdBlue™ Gravity Hose Kit:
- Clear spiral or black EPDM hose (depending on model)
- Piusi Suzzara Blue manual nozzle c/w hose tail inlet
- 60 x 6 IBC bottom adaptor
- Stainless steel hose clips
- 3m or 4m versions available
Product Models and Features
| Code | Model | Description | Price | |
|---|---|---|---|---|
| OAB2230 | Clear AdBlue™ Gravity Hose Kit - 3m | Length – 3m Hose ID (mm) – 19 Hose OD (mm) – 26 Inlet – 60 x 6 Manual Nozzle | £100.80 ex. VAT | |
| OAB2231 | Clear AdBlue™ Gravity Hose Kit - 4m | Length – 4m Hose ID (mm) – 19 Hose OD (mm) – 26 Inlet – 60 x 6 Manual Nozzle | £105.05 ex. VAT | |
| OAB2232 | Black AdBlue™ Gravity Hose Kit - 3m | Length – 3m Hose ID (mm) – 19 Hose OD (mm) – 27 Inlet – 60 x 6 Manual Nozzle | £106.95 ex. VAT | |
| OAB2233 | Black AdBlue™ Gravity Hose Kit - 4m | Length – 4m Hose ID (mm) – 19 Hose OD (mm) – 27 Inlet – 60 x 6 Manual Nozzle | £115.20 ex. VAT |
I’m looking for an AdBlue gravity hose kit with an automatic nozzle but can’t find one. Is this possible?
Only manual nozzles can be used within gravity fed installations, as the back pressure required for an automatic nozzle to open is unlikely to ever be achieved under gravity conditions. For this reason, gravity hose kits are always supplied with manual nozzles.
Can you use a flow meter with a gravity hose kit?
Yes, you can use a flow meter in a gravity fed installation, however it will only accurately count the AdBlue dispensed if the minimum flow rate of the meter is continuously achieved. You therefore need to be careful when selecting, as most flow meters’ minimum flow rate will be too high. The K24 AdBlue flow meter however has a very low minimum, so we happily recommend this for use with AdBlue gravity hose kits.
Resale and volume discounts are available. Send us a trade enquiry to receive your quotation today.
Apply for a credit account today to receive our exclusive benefit for trade customers only.
You may also be interested in
- AB
Premium AdBlue™ Gravity Hose Kit
For gravity installations (Max 7m)
from
£110.00 ex. VAT
